Home
Calendar
Gallery
FAQ
Search
Portal
Register
Usergroups
Memberlist
Log inMaking Weedless Hooks
Making Weedless Hooks
by North Star on Fri Jan 11, 2008 1:27 pm
To Help To Prevent Weeds From Snagging Onto Your Single Hook Lures Or Flies, Take A Piece Of 30lb Stainless Steel Wire Equaling The Length From The eye To The Hook Point. Bend A 45 Degree Angle 1/8 Inch From The End. Place The Bent End Behind The Eye So The Wire Runs From The Lures Head To The Hook Point, Then Lash It In Place With Nylon Thread. Coat The Thread With Epoxy Glue And Let Dry.
_________________
North Star- Site owner
- Number of posts: 8746
Age: 45
Location: Minnesota
Registration date: 2007-12-05 
Re: Making Weedless Hooks
by papa on Fri Aug 22, 2008 7:59 pm
Good advice buddy, I have some weedless hooks but they were bought a long time ago when a guy was going out of bussiness. Only got about a dozen left now.
_________________
papa- Half-Dollar
- Number of posts: 2402
Age: 64
Location: Illinois
Registration date: 2007-12-08 -
saltfisher1- Admin
- Number of posts: 6173
Age: 37
Location: Alabama/Florida Gulf coast
Registration date: 2008-02-05 -
Re: Making Weedless Hooks
by mahiga on Sat Aug 23, 2008 9:50 am
V Good info!!! ty 
_________________
sister sites
www.jmjoutdoorworld.com
www.thebestofallrecipes.com
www.bigfishmidwest.com
www.fishinginnorthamerica.com
mahiga- Nickel
- Number of posts: 42
Age: 60
Location: BLOSSVALE,NY
Registration date: 2007-12-08 -
Blackhawk19l- Quarter-Dollar
- Number of posts: 530
Age: 62
Location: Troy, AL
Registration date: 2008-09-09 -
Re: Making Weedless Hooks
by Vince on Thu Nov 06, 2008 7:46 am
Great Idea. Never thought about making one of these to use.. Thanks Mike.
Vince- Penny
- Number of posts: 8
Age: 47
Location: St Louis, MO
Registration date: 2008-06-29 -
Permissions of this forum:
You cannot reply to topics in this forum